Whole-home repipe
PEX repiping planned to minimize disruption.
Repiping & Water Lines
Whole-Home Repiping in Vancouver, WA
Aging, leak-prone, or corroded pipe? We repipe homes with PEX and repair water lines, for better pressure, cleaner water, and an end to surprise leaks.
★★★★★4.9 · 715 Google reviewsLicensed & insuredEmergency & scheduled service
Licensed & InsuredWA & OR licensed
Upfront Flat-Rate PricingKnow the price first
Emergency & Scheduled ServiceAvailability confirmed when you call
Local & Family-OwnedBased in Vancouver, WA
Services we handle
What we do
If you're patching leaks every few months, or your water runs discolored and the pressure has faded, the pipes themselves are usually the problem. Older galvanized lines corrode from the inside out, and once that starts, one repair just leads to the next.
A repipe replaces the failing lines with PEX, done cleanly, to code, with the walls patched back up. We can also handle a single water-line or main repair when that's all you need. Either way, you get a straight answer on what the pipes actually require.
$150 off
Whole-home repipe. Mention this offer when you book your estimate.
Water line repair
Targeted fixes for a single failing line.
Water main repair & replacement
The line from the meter to your home.
Trenchless options
Where the site allows, less digging.
Pressure correction
Regulators and fixes for low or high pressure.
Clean finish
Access patched and tidied when we're done.
When to call
Signs your home may need a repipe
- Discolored or rusty water
- Low or dropping water pressure
- Repeated leaks in different spots
- Old galvanized pipe (common in older homes)
How the service works
How a whole-home repipe is planned
Repiping is a routing and sequencing project as much as a pipe project. A good plan replaces the failing system while protecting finishes and keeping household disruption predictable.
Map the existing plumbing
The estimate documents pipe material, fixture groups, shutoffs, pressure complaints, leak history, accessible crawlspace or attic routes, and the walls that may need controlled openings.
Design routes and work sequence
New line sizes, trunk and branch routes, fixture connections, access points, and daily water shutdowns are planned before installation begins.
Install, test, and close out
The new system is connected in stages, pressure-tested, flushed, and checked at fixtures. The scope should clearly state how access openings and finish restoration are handled.
Diagnosis before recommendation
When a repipe is more sensible than another patch
One leak does not automatically justify a whole-home project. The pattern across the plumbing system is what matters.
Localized damage or system-wide aging
A single accidental failure can be repaired. Leaks in different areas, internal corrosion, and declining flow throughout the home point to a broader material problem.
Pressure, flow, and pipe sizing
Low performance may come from corroded interiors, undersized branches, a regulator, or the incoming service. Repiping only helps when the distribution piping is the cause.
Occupied-home logistics
Number of bathrooms, finished areas, crawlspace or attic access, household schedule, and planned remodeling shape the sequence and restoration plan.
Home base + regional coverage
Vancouver is home. Our service area reaches farther.
True Plumbing is based in Vancouver, where our team, reputation, and service operation are centered. We also serve nearby communities across southwest Washington and the east Portland metro.
Vancouver & Clark County
Built for the area's varied housing stock
Older Vancouver homes may still contain galvanized or mixed-generation plumbing, while additions and remodels can leave several materials in one system. The estimate should identify what remains, what changes, and how the new piping connects to the water service and fixtures.
Home base · Primary service areaVancouver, Washington
Dedicated coverage for downtown, the waterfront, east Vancouver, and surrounding neighborhoods, backed by a local shop off NE 60th Way.
Explore Vancouver plumbingVancouver-area communities
East & north Clark County
East Portland metro
Appointment availability varies by address and schedule. Not sure whether your property is covered? Call (360) 207-6064 and we will confirm it before you plan around us.
What neighbors say
Rated 4.9 stars by 715 customers
4.9
★★★★★
★★★★★
Our water main burst and Jason came out fast and replaced the entire line within 72 hours. The quick response saved us from major damage and high water bills.
D
Diana C.
Summary of Google feedback
★★★★★
Nick came on a Sunday to repair our broken PEX pipe, which was leaking severely. He explained everything he was doing and did a great job, friendly, efficient, and thorough.
M
Mike K.
Summary of Google feedback
★★★★★
Eric was quick to dig down to the leak, and quick to find and fix it. Very pleasant to work with, I'll call True Plumbing any time.
K
Kathy M.
Summary of Google feedback
Helpful guides
Learn more before the visit
Clear answers connected to this service, written for Vancouver-area property owners.
How Long Does a Whole-House Repipe Take?
Learn what controls a whole-house repipe timeline, how plumbers plan water shutoffs and access, and what Vancouver homeowners should confirm before work begins.
Read the guideWhen Is the Best Time to Repipe Your House?
Wondering if it's time to repipe? Here are the signs your Vancouver home needs new pipes and the smartest times to do the work.
Read the guideHandling Water Line Repairs During a Renovation
Renovating? Here's how to handle and upgrade your water lines while the walls are open, so you don't pay to redo it later.
Read the guideMore we do
Related plumbing services
Good to know
Repiping questions
How do I know whether my house needs repiping?
Repeated leaks, corrosion, discolored water from private piping, unreliable pressure, aging problem materials, and repairs in several unrelated areas can point toward a system-wide issue. One failed valve or isolated pipe does not automatically mean the whole house needs replacement.
Should I repair another leak or repipe the house?
A repair is reasonable when the failure is isolated and the surrounding pipe is sound. Repiping becomes more compelling when leaks repeat, access is being opened again and again, pipe condition is poor across the system, or smaller repairs will not correct pressure and reliability problems.
How long does a whole-house repipe take?
Timing depends on home size, occupied areas, fixture count, access, routing, permit and inspection needs, and how wall or ceiling finishes are handled. A responsible estimate should explain the work sequence, water-shutoff periods, testing, and any finish restoration included in the scope.
Will I have water during a whole-house repipe?
Repiping requires planned shutdowns while new piping is connected and tested, but the schedule varies by project. Ask how the work will be phased, when water will be unavailable, and whether any fixtures can remain usable between work periods.
Do walls and ceilings have to be opened for repiping?
Some access openings are normally required to reach fixtures and route new pipe, though existing crawlspaces, attics, chases, and cabinets may reduce them. The proposal should distinguish plumbing access from patching, texture, paint, cabinetry, and other finish work.
Will repiping improve low water pressure?
It can when restriction, corrosion, undersized branches, or poor interior layout is the cause. Pressure can also be affected by the utility supply, pressure regulator, meter, private service line, elevation, or simultaneous demand, so those factors should be checked before promising improvement.
Tired of patching leaks?
Let's fix the pipes for good.
Repiping and water-line repair across Vancouver and Clark County. Call or request an estimate online.
Open 24 hours · Washington and Oregon licensed · licensed, bonded & insured